종이, 플라스틱, 나무 평범한 뜨거운 호일 스탬핑 기계

Pneumatic hot stamping Machine //Parameter

Technical parameters

H-TC3040LP 

• Hot plate area:300 ×400 mm ,
• Working table area:500 ×650mm
• Max printing pressure:15,000 Kg
• Up and down distance:70mm
• Table up-down distance: 100mm
• Heat wattage: 4×800W
• Foil in feed: Motor Drive
• Temperature adjustment:0-300oC . 

• Hot plate area:400 × 400 mm
• Working table area:500 ×650mm
• Max printing pressure:15,000 Kg
• Up and down distance:70mm
• Table up-down distance: 100mm;
• Heat wattage: 4×800W
• Foil in feed: Motor Drive
• Temperature adjustment:0-300oC .

Works supply

• 110V-220VPower supply;
• 5-7Bar compress air

Package list

• Package size: 1060*1030*1800mm
• Gross weight: 650kg;
• CBM: 1.96524

H.S.Code

8443198000

Certificate

CE

Pneumatic hot stamping machine //Advantage

Function

• Bench made of high strength cast steel forging, has a very high flatness and stability;
• Thread rising institutions to adjust the table lift to facilitate the opening and closing of space according to the height adjustment of the product tipping machine;
• Relay control program is running, easy operation, easy maintenance;
• Pairs of buttons control the stamping head up and down, security is greatly enhanced;
• Pneumatic drive instead of the pneumatic drive, stamping pressure significantly improve the stability is greatly enhanced;
• Heating pipe heating, rapid heating, replacement is simple and convenient;
• Heating plate can be removed to facilitate installation and replacement gilt template;
• Ironing board and table parallelism can be adjusted to facilitate the flexible adjustment depending on the size of the different regions of the pressure;
• Automatic temperature control system can be set depending on the product temperature, automatic temperature control; temperature control accuracy of about 5 degrees;
• Hot foil stamping degree of time and rolls of time can be set freely according to different technical requirements;
• Foil paper automatic document feeder, conveyor length can be set according to the size of the stamping area of freedom.