핫 스탬핑 머신을 굴리는 유명한 리본 롤

• H-TC20RR is designed for roll-like PVC, ribbon or other materials such as stickers gilt surface heat transfer machine, it has two sets of feeding roll, a set of installation tipping paper, a set of installation need gilt roll material. It is widely used in ribbon, stickers, PVC film, ribbon, rubber stamping and other products.  
• Indirect stamping process: First, in gilt plasma screen above the ribbon, followed by then H-TC20RR heat transfer machine transfer. For the indirect process, logo screen spacing depends on the spacing.  
• Direct stamping process: the silicone roller replacement rollers for the prototype model of the copper can be achieved directly bronzing. For the direct process, logo copperplate roller spacing depends on the diameter.

H-TC20RR Ribbon foil hot stamping machine//Parameters

• Size of Roller:120mm  
• Max roller width: 100 mm  
• Max pressure:100 Kg  
• Up-and down distance: 75 mm  
• Heat wattage: 4×400 W  
• Foil feed: Motor Drive  
• Temperature range: 0 - 400oC  
• Net Weight :310 Kg  
• Outer dimension:1300 x 620 x 1430 mm .
• Works supply : 110V-220V Power supply.
• Pakcage dimension:970×700×900mm;
• Gross weight: 95.5KG;
• CBM: 0.6111
• H.S.CODE : 8443192190
• Certificate : CE

H-TC20RR ribbon hot foil stamping machine //Advantage

• 1, Table settings embossing roller, can be tightly foil paper or transfer film pressure in the ribbon surface;
• 2 Rubber rollers rotating heat transfer uniformity, suitable for ribbon continuous stamping;
• 3, Workbench can adjust the position of the front and rear direction, to ensure the best stamping position of the ribbon;
• 4, The transfer pressure, temperature, speed can be based on different material for the flexible adjustment;
• 5, The nose height adjustable stamping head movements can fine-tune, easy to adjust the height of the different products;
• 6. Precise temperature control system, temperature error control in less than 3 degrees; silicone roll radiant heating, thermal efficiency of the utilization factor;
• 7. Rubber roller embossing pressure control system, constant pressure of the transfer process, the transfer effect is more perfect.